13
13. Identify the #8 x 3/4" Truss Head Screws (24).
IMPORTANT: Do not confuse the #8 x 3/4"
Truss Head Screws with the #8 x 3/4" Screws
(5). The #8 x 3/4" Truss Head Screws have
flatter heads.
Set the Left Handrail Top Cover (73) on the left
Handrail (74). Start four #8 x 3/4" Truss Head
Screws (24) into the Left Handrail Bottom Cover
(75), the left Handrail, and the Left Handrail Top
Cover. Slide the Left Handrail Top and Bottom
Covers forward against the console assembly
(D) as shown. Tighten all four Screws.
Attach the Right Handrail Top and Bottom
Covers (81, 82) to the right Handrail (74) in the
same way.
24
24
24
13
82
74
75
74
81
73
D
12. Identify the #8 x 3/4" Screws (5). IMPORTANT:
Do not confuse the #8 x 3/4" Screws with the
#8 x 3/4" Truss Head Screws (24). The #8 x
3/4" Truss Head Screws have flatter heads.
Start four #8 x 3/4" Screws (5) into the Pulse
Crossbar (80), and then tighten them. Be care-
ful not to overtighten the Screws.
12
5
5
80
24
To Next Page
Loading...
