To Next Page
J
Jasmine McclainJul 27, 2025
What to do if my NordicTrack EXP1000 power does not turn on?
- MMrs. Patricia PearsonJul 27, 2025
First, ensure the power cord is properly plugged into a UL-listed surge protector (15 amps, 14-gauge cord, five feet or less) and that the surge protector is plugged into a grounded outlet. Note that the treadmill isn't compatible with GFCI outlets. Also, make sure the key is fully inserted into the console and the on/off switch located near the power cord is in the 'on' position. Finally, check the circuit breaker; if tripped, wait five minutes, then reset it by pressing the switch back in.
General
