To Next PageTo Next PageHow to turn on NordicTrack EXP7i Treadmill?
First, ensure the power cord is correctly plugged into a surge suppressor, and the surge suppressor is plugged into a grounded outlet. Also, make sure the key is inserted into the console. If the power switch has tripped, wait five minutes before pressing it back in. If your circuit breaker trips repeatedly, consider purchasing an arc filter.
What to do if the NordicTrack EXP7i console display is not working?
If the console does not boot up properly, or if the console freezes and does not respond, reset the console to the factory default settings. To reset the console, press the power switch into the off position. Next, locate the indicated small opening on the top of the console. Using a bent paper clip, press and hold the small button inside of the opening and have a second person press the power switch into the on/reset position. Continue to hold the button inside of the opening until the console turns on. When the reset operation is complete, the console will turn off and then turn back on. If it does not, use the power switch to turn the treadmill off and then on again. Once the console turns on, check for firmware updates.
What to do if my NordicTrack EXP7i turns off during use?
If your NordicTrack Treadmill turns off during use, ensure the power cord is securely plugged in; if plugged, unplug it, wait five minutes, then plug it back in. Also, try removing and reinserting the key from the console. If the switch has tripped, wait five minutes and then press the switch back in.
How to fix a NordicTrack Treadmill walking belt that is off-center or slips?
If the walking belt has shifted left, use the hex key to turn the left idler roller screw clockwise 1/2 turn. If it shifted right, turn the left idler roller screw counterclockwise 1/2 turn. If the belt slips, remove the key and unplug the power cord, then use the hex key to turn both idler roller screws clockwise 1/4 of a turn. After adjustments, plug in the power cord, insert the key, and walk on the treadmill for a few minutes to test. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform.
Why does the NordicTrack EXP7i Treadmill walking belt slow down when I walk on it?
The walking belt may slow down if it is overtightened or if you are not using the correct surge suppressor. Use only a surge suppressor that meets all of the specifications. If the walking belt is overtightened, remove the key and unplug the power cord. Using the hex key, turn both idler roller screws counterclockwise 1/4 of a turn. Then, plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
General| Running Surface | 20" x 60" |
|---|---|
| Weight Capacity | 300 lbs |
| Foldable | Yes |
| Warranty | 10-Year Frame, 2-Year Parts, 1-Year Labor |
| Decline | No |
| iFit Compatibility | Yes |
| Bluetooth | Yes |
| Cooling Fan | Yes |
| Speakers | Yes |
| Incline Range | 0 – 12% Incline |
| Speed Range | 0 to 12 MPH |
| Display | 7" HD Touchscreen |
| Motor | 2.6 CHP Motor |
