EasyManua.ls Logo

NordicTrack T 4.0 - User Manual

NordicTrack T 4.0
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER'S MANUAL
www.nordictrack.com
Serial
Number
Decal
Model No. NCTL05610.0
Serial No.
Write the serial number in the space
above for future reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
QUESTIONS?
If you have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER SER-
VICE DEPARTMENT DIRECTLY.
CALL TOLL-FREE:
1-888-936-4266
Mon.–Fri., 7:30 until 16:30 ET
(excluding holidays)
OR E-MAIL US:
customerservice@iconcanada.ca
All manuals and user guides at all-guides.com
all-guides.com

Table of Contents

Questions and Answers

  • E
    Earl ThompsonAug 10, 2025
    How to fix NordicTrack T 4.0 Treadmill if the power does not turn on?
    • B
      Brian DuncanAug 10, 2025
      If your NordicTrack Treadmill power doesn't turn on, ensure the power cord is plugged into a surge suppressor that meets the specifications on page 13 and that the surge suppressor is plugged into a grounded outlet. Note that the treadmill isn't compatible with GFCI-equipped outlets. Also, ensure the key is properly inserted into the console. Finally, check the power switch on the treadmill frame; if it's tripped, wait five minutes, then press it back in to reset.
  • W
    williamsrichardAug 15, 2025
    What to do if NordicTrack T 4.0 power turns off during use?
    • W
      william00Aug 15, 2025
      If your NordicTrack Treadmill turns off during use, check the power switch. If it has tripped, wait five minutes before pressing it back in. Also, ensure the power cord is securely plugged in; if it is, unplug it, wait five minutes, and plug it back in. Finally, remove and reinsert the key from the console.
  • T
    Toni JonesAug 21, 2025
    How to turn off demo mode on NordicTrack T 4.0 Treadmill?
    • L
      leepeggyAug 21, 2025
      If the console displays on your NordicTrack Treadmill remain lit after removing the key, the demo mode is likely activated. To deactivate it, press and hold the Stop button for a few seconds. If the displays are still lit, see THE INFORMATION MODE on page 20 to turn off the demo mode.
  • M
    Michael DunnAug 26, 2025
    What to do if the incline of NordicTrack T 4.0 Treadmill does not change correctly?
    • M
      Michael DuncanAug 26, 2025
      If the incline on your NordicTrack Treadmill isn't changing correctly, insert the key into the console and press one of the Incline buttons. While the incline is changing, remove the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level, recalibrating the incline system.
  • R
    Renee HillAug 30, 2025
    How to adjust a walking belt that is off-center or slips on NordicTrack T 4.0 Treadmill?
    • L
      ldavisAug 30, 2025
      If the walking belt on your NordicTrack Treadmill is off-center, first remove the key and unplug the power cord. If the belt has shifted left, turn the left idler roller bolt clockwise 1/2 turn. If it shifted right, turn the bolt counterclockwise 1/2 turn. Be careful not to overtighten it. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes, repeating until centered. If the belt slips, remove the key and unplug the power cord. Turn both idler roller bolts clockwise 1/4 turn. You should be able to lift each side of the belt 2-3 inches off the platform when correctly tightened. Keep the belt centered, plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes, repeating until properly tightened.
  • S
    steven85Sep 4, 2025
    Why does the walking belt slow down when walked on a NordicTrack Treadmill?
    • M
      Mariah SnowSep 4, 2025
      If the walking belt on your NordicTrack Treadmill slows down when you walk on it, use a single-outlet surge suppressor that meets the specifications described on page 13. If the walking belt is overtightened, remove the key and unplug the power cord. Use the hex key to turn both idler roller bolts counterclockwise 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes, repeating until the walking belt is properly tightened.

NordicTrack T 4.0 Specifications

General IconGeneral
Running Area20" x 55"
Incline0-10%
Speed0-10 MPH
FoldableYes
Weight Capacity300 lbs
Programs20
Weight203 lbs
Display5" Backlit Display

Related product manuals