15
17. Insert the wires and the coaxial cable from the
TV (133) through the hole in the TV Bracket
(131) as shown.
See 17a. Attach the TV Bracket (131) to the TV
(133) with the four M4 x 12mm Screws (130) that
you removed in step 16.
Remove and discard the two indicated screws
(J).
18. Attach the Upper TV Bracket Cover (132) to the
TV Bracket (131) with two #8 x 3/4" Screws (5).
17
17a
18
131
133
Wires
131
132
133
131
130
5
J
Hole
130
133
16. Set the TV (133) face down on a soft surface to
avoid scratching the TV. Remove and save the
four M4 x 12mm Screws (130).
16
To Next Page
Loading...
