How to fix NordicTrack Elite 5700 when the power does not turn on?
If your NordicTrack Treadmill doesn't turn on, ensure the power cord is plugged into a surge suppressor, and that the suppressor is plugged into a grounded outlet. Also, make sure the key is properly inserted into the console. If the power switch has tripped, wait five minutes, then press the switch to reset it.
How to turn off demo mode on NordicTrack Elite 5700 Treadmill?
If the console displays on your NordicTrack Treadmill remain lit after you remove the key, the demo mode is likely turned on. To disable demo mode, hold down the Stop button for a few seconds.
What to do if the NordicTrack Treadmill power turns off during use?
If the power turns off during use on your NordicTrack Treadmill, first check the power switch. If the switch has tripped, wait five minutes, and then press it back in. Also, ensure the power cord is securely plugged in. If it is, unplug it, wait five minutes, and plug it back in. Finally, try removing and reinserting the key from the console.
Why does the NordicTrack Treadmill walking belt slow down when walked on?
If the walking belt slows down when you walk on your NordicTrack Treadmill, it might be overtightened. Remove the key and unplug the power cord. Then, use the hex key to turn both idler roller screws counterclockwise, 1/4 of a turn. Also, the walking belt may need more lubricant, see the front cover of this manual.
How to adjust a NordicTrack Elite 5700 Treadmill walking belt that is off-center?
If the walking belt on your NordicTrack Treadmill is off-center or slips when you walk on it, and the belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn. If the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn. You can also use the hex key to turn both idler roller screws clockwise, 1/4 of a turn. When correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 inches off the walking platform.
Location of safety decals on the equipment.
Essential safety instructions to prevent injury and equipment damage during use.
Overview and initial checks before starting treadmill assembly.
Visual guide to identify all parts required for assembly.
Detailed instructions for assembling the treadmill.
How to use and care for the chest heart rate monitor.
Proper power connection and initial console activation.
Guide to interacting with the console's touch screen interface.
Initial configuration of the console, including network.
How to operate the treadmill in manual mode.
Guides for onboard, set-a-goal, pulse, and iFit workouts.
Procedures for folding, moving, and adjusting treadmill features.
Solutions for power, display, incline, and belt problems.
Workout advice, intensity zones, warm-up, and cool-down.
Identification and visualization of all treadmill components.
Information on product warranty and ordering spare parts.
General| Running Area | 22" x 60" |
|---|---|
| Programs | iFit Enabled |
| Cooling Fan | Yes |
| Bluetooth | Yes |
| Audio | Dual 2" Speakers |
| Incline | 12% |
| Decline | -3% |
| Speed | 0 – 12 MPH |
| Display | 10" HD Touchscreen |
| Weight Capacity | 300 lbs |
To Next Page