8
3
1
109
102
4
4. Tip: Avoid pinching the Rope (not shown).
With the help of another person, pivot the right
Tower Arm (19) upward and secure it to the
Frame (1) with an M10 x 30mm Screw (100).
Repeat this step for the left Tower Arm (19).
19
19
100
3. Press the Rear Bottom Cover (67) onto the
Frame (1).
Then, press the Front Bottom Cover (109) onto
the Frame (1), slide it upward, and attach it with
an M4 x 16mm Self-tapping Screw (102).
Note: For future reference, note that the large
serial number decal (A) is attached to the Frame
(1) beneath the Front Bottom Cover (109).
1
A
67
To Next Page
Loading...
