38
101 1 Pulse Sensor Housing
102 1 Pulse Wire
1
03 1 Pulse Sensor
104 5 Releasable Wire Tie
105 1 Right Upright Wire Harness (Upper)
106 8 Upright Bolt
107 1 Right Upright
108 1 Allen Wrench (5/16”)
109 1 Allen Wrench (7/32”)
110 1 Allen Wrench (5/32”)
111 18 Cable Tie
112 1 Allen Wrench (1/8”)
113 4 Pulse Sensor Base
114 4 Incline Bolt
115 2 Electronics Cover Fastener
116 1 Rear Endcap (Right)
117 2 Torsion Bar Bushing (Lower)
118 4 Pulley Screw
119 4 Base Pad U-Nut
120 2 Small Incline Bushing
121 2 Front Roller Guard
122 2 Platform Screw (Front)
123 2 Front Isolator
124 1 Left Pulley Endcap
125 2 1 1/4” Bumper
126 1 Flywheel
127 4 Controller Box Screw
128 1 Incline Wire Harness (Short)
129 2 Spacer
130 2 Foam Grip
131 1 Left Upright Wire Harness (105”)
132 1 Static Decal
133 2 Incline Motor Cover (Bottom)
134 2 Black Torsion Bar Washer
135 1 Foam Pad
136
1 Resistor
137 6 5/16” Flat Washer
138 6 1/2” Nylon Washer
139
1
Cup Holder Pad
140 1 Accessory Holder Pad
141 1 Warning Decal
142 1 Accessory Holder
143 2 Sensor Screw
144 1 Filter Wire
145 1 Power Wire Harness (Left)
146
1
Roll Pin
147 2 Front Isolator Nut
148 50 Small Insert
149 2 Pulse Housing Clip
1
50 1 Resistor Wire
151 2 Motor Insert
152 5 Rear Base Inserts
153 2 Fastener Receptacle
154 2 Plastic Spacer
155 2 Incline Pivot Bushing
156 2 Incline Bushing (Short)
157 2 Incline Bushing (Long)
158 1 Cable Bushing
159 2 Fastener Spring
160 2 Fastener Retainer
161 2 Roller Guard Screw
162 2 On/Off Switch Screw
163 6 Console Screw
164 2 Belt Guide Lock Washer
165 1 Incline Link Bar
166 2 Nylon Washer
167 1 Access Cover
168 1 Large Cover Plate
169 1 J-bolt Nut
170 2 Incline Motor Cover (Top)
171 1 Hood Cover
# 2 Sensor Nut
# 1 97” Power Board Wire
# 1 110” Power Board Wire
# 1 4” Black Wire, 2F
# 1 4” White Wire, M/F
# 1 10” White Wire. 2F
# 1 22” White Wire. 2F
# 1 20” White Wire. 2F
# 1 7” Green Wire, M/Ring
# 1 12” Green Wire, F/R
# 1 12” Green Wire, 2 Ring
#
1 12” Wire Harness, 6 Wire
# 1 20” Wire Harness, 3 Wire
# 1 50” Wire Harness, 3 Wire
#
1
76”Wire Harness, 15 Wire
# 1 77” Wire Harness, 4 Wire
# 1 20” Controller Wire
#
1 User's Manual
* Includes all parts shown in the box
# These parts are not illustrated
Specifications are subject to change without notice.
Key
No. Qty. Description
Key
No. Qty. Description
To Next Page
Loading...
