NordicTrack NTEL71423.2 - Page 14

14
12
Avoid pinching
the wires
7
101
128
12. Insert the excess wire into the Upright (4).
Avoid pinching the wires. Attach the Console
(7) to the Console Bracket (128) with four
M4 x 16mm Screws (101); start all four
Screws, and then tighten them.
13
13. Orient the Lower Console Cover (152) as shown,
and snap it into the back of the Console (7).
Then, orient the Upper Console Cover (153)
as shown, and snap it into the back of the
Console (7).
153
152
7
101