NordicTrack T 20.5 NETL19713.0 User Manual

9
3. Remove the tie securing the Upright Wire (78) to
the left Upright (73).
With the help of a second person, hold the con-
sole assembly (A) near the Upright (73).
Attach the console assembly (A) to the Upright
(73) with four 5/16" x 1" Screws (2) and four
5/16" Star Washers (5). See the inset drawing.
Be careful not to pinch the wires (B, 78). Start
all four Screws, and then tighten them.
A
3
78
B
5
2
5
73
B
2
78
4. Connect the Upright Wire (78) to the console
wire (B). See the inset drawing. The connec-
tors should slide together easily and snap
into place. If they do not, turn one connector
and try again. IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER.
Insert the wires (B, 78) into the console
assembly (A).
78
4
A
B
78
B

NordicTrack T 20.5 NETL19713.0 Specifications

General

Brand	NordicTrack
Model	T 20.5 NETL19713.0
Category	Treadmill
Language	English