14
16. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see pages 27 and 28).
15. Attach the upper end of the Storage Latch (53)
to the Frame (56) with a 3/8" x 1 3/4" Bolt (6)
and a 3/8" Nut (12). Note: It may be necessary
to move the Frame (56) back and forth to align
the Storage Latch with the Frame.
Lower the Frame (56) (see HOW TO LOWER
THE TREADMILL FOR USE on page 25).
15
53
12
56
6
To Next Page
Loading...
Need help?
General
