NordicTrack T18.0 Treadmill User Manual

11
10. Set the console assembly on the Handrails (81,
82) and the Upright (86). Be careful not to
pinch any wires. Insert the excess Upright Wire
(not shown) into the Upright.
Attach the console assembly to the Crossbar
(not shown) with three #8 x 1/2" Screws (1). Do
not fully tighten the Screws yet.
10
Console
Assembly
1
82
1
86
81
9. With the help of a second person, hold the con-
sole assembly near the Upright (86).
Connect the Upright Wire (79) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Remove the wire tie from the
Upright Wire.
Console
Assembly
Console
Wire
Wire
Tie
86
9
79
79
Console
Wire

NordicTrack T18.0 Treadmill Specifications

General

Brand	NordicTrack
Model	T18.0 Treadmill
Category	Treadmill
Language	English