NordicTrack T18.0 Treadmill - Firmly Tighten the Four 3;8 X 1 Patch Bolts (4); Only One Side Is Shown). Then, Firmly Tighten the; Three 3;8 X 2 3;4 Patch Bolts (7

12
12. Firmly tighten the four 3/8" x 1" Patch Bolts (4)
(only one side is shown). Then, rmly tighten the
three 3/8" x 2 3/4" Patch Bolts (7).
Slide the Upright Cover (87) down against the
Base (94).
Press the Right Base Cover (84) and the Left
Base Cover (not shown) onto the Base (94).
12
94
87
84
4
7
11. Tighten six 5/16" x 1 1/4" Patch Bolts (5) with six
5/16" Star Washers (9) into the console assem-
bly. Start all six Patch Bolts, and then tighten
them.
See step 9. Tighten the three #8 x 1/2" Screws
(1).
11
Console
Assembly
9
9
9
9
5
5
5
5