14
15
15. Orient the Upright Crossbar (105) as shown.
Carefully slide the Upright Crossbar (105)
between the Left and Right Uprights (89, 90).
Attach the Upright Crossbar (105) with the four
5/16" x 3/4" Patch Screws (4) that you removed
in step 5 and four 5/16" Star Washers (11); start
all four Patch Screws, and then tighten them.
11
4
11
90
89
105
4
16. Insert the Tray (31) from the front of the treadmill
and set it on the Upright Crossbar (105) as
shown.
Attach the Tray (31) to the Upright Crossbar
(105) with four #8 x 1/2" Screws (1); start all
four Screws, and then tighten them.
16
1
105
1
31
To Next Page
Loading...
