Daily shutdown procedure
1. Turn the main electrical switch OFF at the applicator.
2. Trigger the gun(s) to relieve all system pressure.
PUMPAIR
3. Reduce pump air pressure to zero (0) at the regulator.
.
0 PSI (0 BAR)
4. (Systems with automatic guns only) Reduce gun air pressure(s) to
GUNAIR
zero (0) at the regulator(s).
0 PSI(0 BAR)
5. (Systems with manual guns only) Place the gun trigger safety in the
locked position and hang the handgun by the hole in its handle.
0 Nordson Corporation 1994 PIN 106 701A
All Rights Resewed 41-2300SP - Issued 1194
To Next Page
Loading...
