Nordson ProBlue 1028303 User Manual

Copyright Notice
ProBlue Adhesive Melters
Instruction Sheets
TM
Issued 10/02

Nordson ProBlue 1028303 Specifications

General

Brand	Nordson
Model	ProBlue 1028303
Category	Melting Machines
Language	English

Summary

Pump Service Kit (P/N 1028303)

Remove the Pump

Steps to safely detach the pump from the melter assembly.

Install the New Pump

Steps to install a new pump assembly into the melter.

Pneumatic Panel Assembly Service Kit (P/N 1028307)

Remove Pneumatic Panel Assembly

Steps to disconnect and remove the pneumatic panel assembly.

Install Pneumatic Panel Assembly

Steps to connect and install the new pneumatic panel assembly.

Pressure Discharge Valve Service Kit (P/N 1028308)

Replace Pressure Discharge Valve

Procedure for replacing the pressure discharge valve.

Manifold Service Kit (P/N 1028309)

Prepare Melter for Manifold Service

Steps to prepare the melter before servicing manifold O-rings.

Remove the Manifold

Procedure for disconnecting and removing the manifold from the tank.

Replace Manifold O-Rings

Steps to replace the O-rings on the manifold.

ProBlue™ 10 Main Circuit Board Service Kit (P/N 1028323)

Replace Main Circuit Board (P10)

Steps to replace the main circuit board in a P10 ProBlue melter.

6-Hose Extension Board Kit (P/N 1028324)

Install 6-Hose Extension Board

Steps to expand hose capacity by installing a 6-hose extension board.

CPU Board Service Kit (P/N 1028325)

Replace CPU Board

Steps to replace the CPU board in a ProBlue adhesive melter.

Operator's Panel/Enclosure Service Kit (P4/P7) (P/N 1028326)

Replace Operator's Panel/Enclosure (P4/P7)

Steps to replace the operator's panel/enclosure on a P4 or P7 melter.

Operator's Panel/Enclosure Service Kit (P10) (P/N 1028327)

Replace Operator's Panel/Enclosure (P10)

Steps to replace the operator's panel/enclosure on a P10 melter.

RTD Service Kit (P/N 1028320)

Replace Tank RTD

Procedure for replacing the RTD sensor in the tank.

Replace Manifold RTD

Procedure for replacing the RTD sensor in the manifold.

Thermostat Service Kit (P/N 1028321)

Replace Manifold Thermostat

Procedure for replacing the thermostat in the manifold.

Replace Tank Thermostat

Procedure for replacing the thermostat in the tank.

ProBlue Melter Main Circuit Board Service Kit (P4/P7) (P/N 1028322)

Replace Main Circuit Board (P4/P7)

Steps to replace the main circuit board in P4 and P7 ProBlue melters.

Hose/Gun Module Service Kit (P/N 1028328)

Replace Hose/Gun Module

Steps to replace a hose/gun module in any ProBlue melter.

Software Service Kit (P/N 1018817)

Remove CPU Board

Steps to remove the CPU board for software service.

Remove and Replace IC Chip

Procedure to remove and install the IC chip on the CPU board.