Nordson ColorMax - Procedure 7: Feed Center Setup - Operator B (Part 2); Similar Shade Color Change Steps; Different Shade Color Change Steps; Set Vacuum Diverter Valve for Spray-to-Waste

© 2005 Nordson Corporation
All Rights Reserved
SIMILAR SHADE
COLOR CHANGE STEPS
DIFFERENT SHADE
COLOR CHANGE STEPS
Procedure 7
Blow off sieve deck,
sieve screen and
under pan
Assemble sieve and
turn chute toward
lances
Set sieve screen aside
and clean it later. Blow
off sieve deck, under
pan and turn chute
toward lances. Install
appropriate sieve
screen.
Turn vacuum diverter
valve to spray-to-waste
position
Do not install new powder source until end of
Procedure 8
OPERATOR B – PART 2
1
Install powder
source
2 1 2