Nordson ColorMax - Procedure 8: Different Shade Color Change - Operator B; Remove and Reinstall Hose Manifolds; Install New Powder Source

© 2005 Nordson Corporation
All Rights Reserved
DIFFERENT SHADE COLOR CHANGE ONLY
If you are performing a similar shade color change, proceed to Procedure 9.
Procedure 8
Remove
hose
manifolds
from lance
assembly
Blow down
into powder
pumps to
clear away
any
remaining
powder
Install
other
hose
manifolds
Install new
powder feed
source and
connect
fluidizing air
OPERATOR B
1 2
43