Nordson ColorMax - Procedure 3: Color Change Steps - Operator B; Initiate Color Change Sequence; Disable Sieve Function; Unclamp Pan and Position Chute

© 2005 Nordson Corporation
All Rights Reserved
Procedure 3
OPERATOR B
Unclamp under pan
and turn chute toward
back wall
Remove powder
source from feed
center
NOTE: If using optional
fluidizing hopper (as shown),
disconnect fluidizing air line
before removing hopper
COLOR CHANGE
CYCLE DONE light
flashes
1
2 3
DISABLE
SIEVE
4
Color Change