Operator’s manual
Optima 51 / M51 / M56 / M57T / 60T
10
Dynapôle Ludres/Fléville, 166 rue Ampère/BP 60093 - 54714 LUDRES - FRANCE - Tél.+33 (0)3 83 25 69 60 - Fax. +33 (0)3 83 26 12 85
9. Transport of the machine by lorry
The machine should be secured to the lorry in such a way as to
guarantee absolute safety for nearby persons and equipment.
See Safety Rules on Page 7.
Precautions for carriage when not tted to a tractor or carrying vehicle:
It is essential to lock the arm with the locking kit (blue supports)
supplied with the machine (Figures 1.02, 1.03, 1.04, 1.05, 1.06).
Contact NOREMAT who can supply you with the correct locking kit.
For safety reasons, the equipment is delivered in the ‘delivery’ position. In this position, machine
movements are locked by supports that serve both for lifting the machine and for anchoring it
to the lorry.
These supports are identied by their unusual blue colour.
When it is delivered, the machine is unloaded and placed on the ground on it’s stands at the correct
height to be tted to a standard tractor.
The supports should not be moved until the machine is tted to the tractor and started.
Observe lifting safety rules. In particular:
-use only designated points to attach slings and lift only at these points shown
in the following diagrams.
-never lift the machine with slings that are in poor condition or incapable of lifting
the required weight.
-never walk or stand under the machine.
gure 1.02
General Safety Rules
To Next Page