NOREMAT Optima 51 - Page 31

Operator’s manual
Optima 51 / M51 / M56 / M57T / 60T
31
Dynapôle Ludres/Fléville, 166 rue Ampère/BP 60093 - 54714 LUDRES - FRANCE - Tél.+33 (0)3 83 25 69 60 - Fax. +33 (0)3 83 26 12 85
4. Preperation and attachment
4 1Recommendationsbeforeattaching
As with all operations, follow the safety rules
Never try to remove the machine locking bars by moving the machine arms with the means of lifting
(crane etc).
The correct procedure is as follows:
- t the machine to the tractor.
- engage the PTO.
- release the locking bars and pins only when movement makes it possible.
The tractor/cv must be tted with a cab or at least a guard to protect the driver against any possible
material being thrown from the tool.
Check:
- the condition and correct tting of the PTO shaft guard.
- tyre pressures of the tractor/cv.
- inspect the security of the frame.
Operation and maintenance