Noritz NCC199CDV - Page 41

41
CR60-IM.v0429.4
Installing the CR60 with Optional Floor Support to Wall Mount Racks
Each Noritz wall mounted rack comes with an optional floor support included with each purchase. The Noritz CR60 racks
are designed to be installed with or without this bottom support. The optional floor support is supplied to ease the
installation of the CR60 rack.
Included items for optional floor support:
Part name
Quantity
Part Name
Quantity
End Panel
2
¼” x 20 x 3½”
Hex Bolt
4
1” Support
bar
1
¼” x 20 x 1”
Hex Bolt
4
Flat
Washer
12
Lock Washer
4
Nut
4
Do not use the CR60-WH as a free-standing system. The system must be properly anchored to a vertical wall as outlined
in this section. Failure to do so may lead to serious injury or death.