36
- Cleaning Cold Water Inlet Filter / Recirculation Water Filter
1. Place a bucket under the appliance to collect the residual water inside the water heater.
2. Press ‘Power button’ to turn off the electrical power to the water heater. And then turn off the gas valve.
3. Close water supply valve on the inlet to the appliance.
4. Open the hot water faucets completely.
Maintaining the Water Heater
Chapter 4. – Maintenance
6. To rell the water heater, follow the steps of “Draining the Water Heater” in reverse.
Cold Water Filter
5. Remove the cold water inlet lter and recirculation water lter. And then clean it with a toothbrush and clean running water.
Recirculation Water Filter
To Next Page
Loading...
