EasyManuals Logo

NormaTec PULSE 2.0 User Manual

NormaTec PULSE 2.0
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
10
TECHNICAL INFORMATION >>
Do not attempt to take apart the system.
The system has no user-serviceable parts. There are no user-replaceable fuses.
BLUETOOTH WIRELESS TECHNOLOGY
The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc., and any use of such marks by NormaTec is under license.
In the unlikely event of loss of a stable Bluetooth connection, the system will attempt to re-establish its connection automatically.
The NormaTec device is completely autonomous, and will continue operating normally, even during a loss of connectivity. If this
device does cause interference, which can be determined by turning the device o and on, the user is encouraged to try to
correct the interference by reorienting or relocating the device, increasing the separation between equipment and the device, or
connecting the device to a dierent outlet on a circuit if it is plugged in.
The NormaTec PULSE 2.0 device uses Bluetooth 5.0 wireless technology with the following radio specifications:
Frequency 2.36 to 2.5 GHz
Modulations GFSK at 1 Mbps, 2 Mbps data rates
Transmit Power +4 dBm
Receiver Sensitivity BMD-300/301: -96 dBm (BLE mode) BMD-350: -94 dBm (BLE mode)
Security AES-128
Contains Rigado, Inc. BLE Module BMD-300-A-R, FCC ID: 2AA9B04, IC ID: 12208A-04
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur
de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
onctionnement.
INTERNAL BATTERY INFORMATION
This device is equipped with a rechargeable lithium ion battery. The internal battery is designed to allow use of the NormaTec
PULSE 2.0 anywhere—even when power outlets aren’t available. The NormaTec PULSE 2.0 may need to be plugged in before
first use. The battery will provide power for 2+ hours of continuous use. It takes approximately 6 hours to fully charge the
battery when the device is plugged in and not in use.
The rechargeable lithium ion battery is intended to be changed only by authorized service personnel with the use of a special
service tool.
PRODUCT SPECIFICATIONS
PULSE 2.0 Dimensions: 4” (width), 4.5” (depth), 8” (height); [10.2 cm (width), 11.43 cm (depth), 20.32 cm (height)]
PULSE 2.0 Weight: 3.6 lbs [1.63 kg]
PULSE 2.0 electrical requirement: 15V DC 1 A
Temperature (operating): +41° F to 104° F [+5° C to +40° C]
Temperature (storage): -13° F to +158° F [-25° C to +70° C]
Relative Humidity (operating): 15% to 93%, non-condensing
Relative Humidity (storage): -25˚ C without relative humidity control; +70˚ C at relative humidity up to 93%, non-condensing

Other manuals for NormaTec PULSE 2.0

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NormaTec PULSE 2.0 and is the answer not in the manual?

NormaTec PULSE 2.0 Specifications

General IconGeneral
Compression Levels7
Bluetooth ConnectivityYes
Zone Boost FeatureYes
MaterialNylon
PowerRechargeable Lithium-Ion Battery
Pressure Range30-110 mmHg
Product NameNormaTec PULSE 2.0
CategoryPersonal Care Products
TypeRecovery System
TechnologyPneumatic Compression
Zones5
Charging Time3 hours
CompatibilityiOS and Android
Mobile AppYes
Warranty1 year

Related product manuals