8 6-050700 X2
212iLW & 242iLW Standalone Keypad
Installation & Programming Manual
5. Wiring
5.1 Wire Harness Confi guration
Pin Wire Color Signal Name
1 Red V+ (Keypad Power)
2 Black V- (Keypad Power)
3 White/Black Not Used
4 White/Yellow Not Used
5 Brown Remote Trigger (REX)
6 White/Orange Loop Common (REX and Door Loop)
7 White Door Loop Monitor
8 Green Main Relay – Normally Open
9 Blue Main Relay - Common
10 Gray Main Relay – Normally Closed
Note: For wiring the accessory relay board, see Sections 5.6 and
5.7.
Figure 4. Keypad Connector and Wire Harness
To Next Page
Loading...
