Copyright © 2019 Nortek Security & Control LLC.
79
Select Done
The following screen appears when the module is
inserted and syncing with the system.
Working
7. Press Radio Test.
Radio Test
8. Press Start Radio Test.
Start Radio Test
9. Confi rm successful radio test.
Confi rm Test Successful
10. (Optional) Install the lock on the Cellular Radio
Module bay door. See “(Optional) Lock/Unlock the
Cellular Radio Module Door” in the section that
follows.
11. Replace the hinged door.
12. Tap Done.
(Optional) Lock/Unlock the Cellular Radio Module
Door
The Cellular Radio Module fi ts into the bay on the side of
the GC3e Panel and features a built-in door lock under the
faceplate. The Control Panel ships with the door-lock screw
in the UNLOCK position. To limit the possibility of someone
removing the door, installers have the option of moving the
screw to the LOCK position.
To Next Page
Loading...
