Nortek 2GIG GC3 - System Tests; Navigating to System Tests

Copyright © 2019 Nortek Security & Control LLC.
71
Language Menu
4. Select English, French, or Spanish to change
System Language.
System Tests
To ensure continued protection and proper system
operations, it is important to perform a sensor and console
test on a weekly basis.
NOTE: To use this feature, you must know the four-
digit Master User Code.
Navigate to System Tests
To navigate to the System Tests module:
1. At the Home screen, tap System Settings.
2. Enter the Master User Code to access the System
Settings menu.
System Tests
3. Tap System Tests.
This reveals the Systems Tests menu.
Systems Test Menu
4. Tap one of these buttons to choose the test type:
»
Sensors Test: Tests the wireless signal between
the GC3e Panel and installed sensors. See
“Performing a Sensors Test” below.
»
Console Test: Tests the function of the GC3e
Panel’s audio and buttons. See “Performing a
Console Test” on the next page.