Copyright © 2019 Nortek Security & Control LLC
80
To lock and unlock the Cellular Radio Module door:
1. Use your fi ngertips or carefully insert a screwdriver
at the edge of the faceplate. Then gently pry the
faceplate from the chassis.
GC3e Panel—Removeable Faceplate
2. Remove the door-lock screw from the UNLOCK
position on the right.
GC3e Panel—UNLOCK position
3. Install the screw into the LOCK position on the left.
This locks the hinged door on the GC3e Control
Panel.
GC3e Panel—LOCK position
4. Snap the faceplate back on the GC3e Control
Panel.
Chimes
The master user can assign chimes to sensors to provide
notifi cation anytime a sensor is opened.
1. At the Home screen, tap System Settings.
Home Screen - System Settings
2. Select Sensor Chimes.
Sensor Chimes
3. Select a sensor from the list.
Sensor List
4. Select a chime from the dropdown list - an example
will play when an option is selected.
To Next Page
Loading...
