Nortek E4EB Series User Manual

E4 Series Electric Furnace
Downflow & Upflow Models
WARNING / AVERTISSEMENT
ELECTRICAL SHOCK, FIRE OR
EXPLOSION HAZARD
Failure to follow safety warnings
exactly could result in serious injury
or property damage.
Improper servicing could result
in dangerous operation, serious
injury, death or property damage.
   
electrical power to furnace.
   
all wires prior to disconnecting.
Reconnect wires correctly.
   
servicing.
RISQUE DE CHOC ÉLECTRIQUE,
D’INCENDIE OU D’EXPLOSION
Le non-respect des avertissements de sécurité pourrait
entraîner un fonctionnement dangereux de l’appareil, des

Un entretein incorrect pourrait entraîner un fonctionnement

des dommages matériels.

chaud avant de prodéder aux travaux d’entretein.
      

raccorder correctement.

l’entretien.
DO NOT DESTROY. PLEASE READ CAREFULLY & KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
OWNER’S MANUAL & INSTALLATION INSTRUCTIONS

Nortek E4EB Series Specifications

General

Brand	Nortek
Model	E4EB Series
Category	Furnace
Language	English

Summary

USER INFORMATION

IMPORTANT SAFETY INFORMATION

Crucial safety guidelines for furnace operation and maintenance.

INSTALLER INFORMATION AND REQUIREMENTS

INSTALLER SAFETY AND CODE COMPLIANCE

Safety warnings and regulatory codes for furnace installation.

MINIMUM CLEARANCES AND LOCATION

Guidelines for unit placement and required clearances.

CIRCULATING AIR REQUIREMENTS

DUCTWORK AND AIRFLOW SPECIFICATIONS

Guidelines for air ducts, plenums, return/supply air connections, and acoustical ducts.

FURNACE INSTALLATION PROCEDURES

GENERAL INSTALLATION GUIDELINES

Overview, pre-installation checks, and locating the unit.

FLOOR OPENING CUT-OUT DIMENSIONS

DUCT CONNECTOR INSTALLATION

SPECIFIC INSTALLATION CONFIGURATIONS

ELECTRICAL WIRING AND CONNECTIONS

ELECTRICAL SAFETY AND LINE VOLTAGE

Warnings for electrical shock, fire hazards, and line voltage wiring requirements.

POWER SUPPLY, GROUNDING, AND THERMOSTAT

Connecting supply wires, grounding, and thermostat wiring.

BLOWER AND CONTROL SYSTEMS

BLOWER INSTALLATION AND SPEED SELECTION

START-UP AND ADJUSTMENTS

PRE-START CHECK LIST

START-UP PROCEDURES

WIRING DIAGRAMS

E4EB-010H MODELS WIRING DIAGRAM

E4EB-012H MODELS WIRING DIAGRAM

E4EB-015H & E4EB-017H MODELS WIRING DIAGRAM

E4EB-020H & E4EB-023H MODELS WIRING DIAGRAM

INSTALLATION PERFORMANCE CHECK LIST

ELECTRICAL SYSTEM CHECKLIST ITEMS

Verification points for electrical connections, polarity, voltage, and grounding.

COMBUSTION AIR AND VENTING CHECKS