Nortel 8600 - Precautions; Electric Shock Safety Warning; Fan Blade Injury Warning; Laser Eye Injury Warning

9
Precautions
For your safety, review the following personal safety warnings before
working with the Ethernet Routing Switch.
WARNING
Risk of injury by electric shock
To avoid the danger of electric shock, be careful when working
with power equipment and connections.
WARNING
Risk of injury by fan blades
When removing the fan module, do not put your hands into the
opening because there are spinning fan blades in the adjacent fan
modules. There is also a risk of electric shock from the electrical
connector at the rear of the slot.
WARNING
Risk of eye injury by laser
Never look directly into the end of a fiber cable or use optical
device to look at the end of a fiber cable unless certain the other
end of the cable is not connected. The laser travelling through a
fiber cable can injure the retina.
Protecting modules
Follow these general practices to prevent equipment damage when working
on the Ethernet Routing Switch:
•
Always wear an antistatic wrist strap connected to an Electrostatic
discharge (ESD) grounding jack when handling modules.
•
Always set modules on appropriate antistatic material.
•
Handle modules by the faceplate. Do not touch pins or electrical
connections.
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 01.01 Standard
4.1 21 December 2006
Copyright © 2006 , Nortel Networks Nortel Networks Confidential
.