13
Installing the chassis
This section gives instructions you can use when you install the chassis.
Unpacking
Step Action
1
Remove the shipping container.
2
Place the chassis on antistatic material.
3
Check all items for damage.
4
Use the following chassis shipping accessories checklist to verify the
contents of the shipping container.
—End—
If you find any damage, contact your Nortel sales representative.
Table 1
Chassis shipping accessories checklist
Check
Accessory Use To
Bracket kit containing: two
rack-mounting brackets and
Phillips-head screws
Support the chassis in an equipment
rack
Screw package Mount the chassis in an equipment
rack
Side cable-management bracket(s):
two brackets for the 8010 chassis and
one bracket for the 8006 and 8003
chassis
Manage network interface cables
Rubber footpads Keep the chassis from slipping when
mounting it on a flat surface
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 01.01 Standard
4.1 21 December 2006
Copyright © 2006 , Nortel Networks Nortel Networks Confidential
.
To Next Page
Loading...
