215658-B
14
Figure 4 Pin assignments in the console port
Connecting AC power
Required cable: AC power cord that meets the requirements of your local
electrical code. Refer to Table 2 for plug specifications.
Connector Pin number Signal
2 Transmit data (TXD)
3 Receive data (RXD)
5 Signal ground (GND)
1, 4, 6, 7, 8, 9 Not used
Table 2 International power cord specifications
Country/plug description Specifications Typical plug
Continental Europe:
• CEE7 standard VII male plug
• Harmonized cord (HAR marking on the outside of
the cord jacket to comply with the CENELEC
Harmonized Document HD-21)
220 or 230
VAC
50 Hz Single
phase
U.S./Canada/Japan:
• NEMA5-15P male plug
• UL-recognized (UL stamped on cord jacket)
• CSA-certified (CSA label secured to the cord)
100 or 120
VAC
50-60 Hz
Single phase
1
5
6
9
9473EA
228FA
227FA
book.book Page 14 Thursday, July 29, 2004 10:07 PM
To Next Page
Loading...
