Nortel BayStack 425-24T - Page 17

Installing the BayStack 425 Switch
15
Table 3 AC Power specifications
United Kingdom:
• BS1363 male plug with fuse
• Harmonized cord
240 VAC
50 Hz Single
phase
Australia:
• AS3112-1981 male plug
240 VAC
50 Hz Single
phase
Input current: 2 A @ 120 VAC, 1 A @ 240 VAC
Input voltage (rms): 100 to 240 VAC at 50 to 60 Hz
Power consumption: 46 W
Thermal rating: 75 BTU/hr maximum
Danger: Use only power cords that have a grounding path. Without a proper ground, a
person who touches the switch is in danger of receiving an electrical shock. Lack of a
grounding path to the switch may result in excessive emissions. (For translations of this
statement, see page 29.)
Table 2 International power cord specifications (continued)
Country/plug description Specifications Typical plug
229FA
230FA
book.book Page 15 Thursday, July 29, 2004 10:07 PM