Nortel Meridian SuperNode SL-100 - Automatic Line

Meridian SL-100 features 6-7
Meridian SuperNode MSL-100 Meridian Modular Telephones Reference Manual MSL11
Press the AUD key.
Response:
The AUD indicator goes off.
Note: The telephone can not be on an active conversation. You must either
place the active call on hold or release the call to delete an Automatic Dial
number.
You have completed this procedure.
Procedure 6-8
Placing a call using the Auto Dial key
Press the directory number (DN) key.
Response:
The DN indicator comes on, and the caller receives dial tone.
Press the AUD key.
Response:
The call proceeds as if the directory number had been dialed manually.
You have completed this procedure.
Automatic Line
The Automatic Line feature may be assigned to any extension on the
telephone, including the primary DN. If the automatic line is assigned to the
PDN key, then use the PDN key to call a predetermined number very
quickly. Use Procedure 6-9 to make an Automatic Line call, and use
Procedure 6-10 to answer an Automatic Line call.
Note: The Automatic Line feature cannot be assigned to the PDN key in
ACD applications because that key acts as the INCALLS key.
Procedure 6-9
Placing a call using the Auto Dial key
Lift the handset.
Response:
The PDN indicator comes on.
Press the extension key designated as the Automatic Line extension key.
Response:
The telephone automatically dials the number designated as the Automatic Line
number.
3
4
1
2
3
1
2