7-20 Keypad dialing
555-4001-114 Standard 10.02 November 1999
Scroll <<< >>> P to exit.
You have completed this procedure.
Data parameter display (P62 continued)
The volume control key (<<< >>>) is used as a scroll key in Program mode.
Table 7-1 shows examples of scrolling through the data parameter settings.
Note: The P in the following table represents the Program key.
Table 7-1xxx
Data parameter display
User action
Telephone set response
Press P62. Set enters Program mode and data parameter
display.
Press >>>. Set displays Screen 1 settings.
Press >>>. Set displays Screen 2 settings.
Press >>>. Set displays Screen 3 settings.
Press >>>. Set displays Screen 4 settings.
Press >>>. Set displays Screen 1 settings.
Press <<<. Set displays Screen 4 settings.
Press <<<. Set displays Screen 3 settings.
Press P key. Set exits from Program mode.
Each parameter shown in the following examples contains the maximum
number of characters for that particular field.
Example 1:
DTR OFF BAUD RATE 9600
DCD OFF SPACE PARITY
Example 2:
VLL OFF TERMINAL MODE
RLB OFF HOTLINE OFF
Example 3:
DNN 4485655 VDN KEY 0
TIMEOUT OFF
2
3
To Next Page
Loading...
