Need help?Do you have a question about the Nortel Meridian and is the answer not in the manual?
Details the physical components, including LEDs, connectors, and power supply for the IP Adapter units.
Outlines space, temperature, cabling, and mounting information required before installing IP Adapter units.
Covers IP addressing, routing, and other network issues for IP Adapter unit deployment.
Presents supported IP adapter unit deployment models and transport media options.
Lists general safety measures and required hardware/software tools for installation.
Provides step-by-step instructions for installing the internal IP adapter circuit card into a digital telephone.
Offers guidance on installing the external IP adapter unit on a desk or mounting it on a wall.
Describes system configuration settings and property sheets within the Configuration Manager.
Explains how to change IP address, subnet mask, and default gateway for the IP adapter unit.
Details how to change RLC connection information needed to establish connections with the RLC.
Explains how to set passwords for Configuration Manager and the IP Adapter unit for security.
Guides on backing up the IP adapter unit's configuration by downloading it to a text file.
Describes how to restore the IP adapter unit's configuration from a text file via TFTP protocol.
Details the process of upgrading the IP adapter unit's firmware using the TFTP protocol.
Guides on upgrading the Configuration Manager software installed on the administration PC.
Helps identify the cause of a problem by asking relevant questions about the setup and operation.
To Next Page
General