Remark:
1. When step counting is turned on, step counting is triggered for 15 consecutive steps,
and the number of steps is included in the total number of steps counted; 15 steps
will not trigger step counting, and the number of steps will not be included in the
total number of steps counted; during the step counting process, if there is no
continuous action or no movement, it will enter the step counting sleep power
saving state.
2. In the step counting mode of the normal time display screen, press and hold the S2
key for a second to clear all real-time step counting data (steps, calories, walking
kilometers, walking time, average speed and target step percentage) in the current
mode. rate factor). If the data is not cleared, the next step counting will be
accumulated on the current data.
3. The step count data of the day will be automatically saved and automatically cleared
at 00:00:00 the next day.
4. When the percentage completion rate of the target number reaches 100%, it will
display a full grid (full circle). At this time, the whole circle flashes, and at the same
time it emits an alarm sound of "Bl, Bl, B1" for 20 seconds. During the beeping and
flashing process, press the S1 key to stop the beeping and flashing,
5. The step counting function can be manually turned off in the abnormal walking step
counting state to save power and energy and prolong the battery life; when counting
steps again, manually turn on the step counting function, and the step counting data
will be accumulated on the original step counting data .
6. The current data unit is displayed according to personal settings
7. No button operation, 60 seconds will automatically return to the normal time display
screen.
10
10
To Next Page
Loading...
