North Edge ALPS - Interface Switching View

5. Running second timing function: the maximum running second timing is 23 hours,
59 minutes and 59 seconds, accurate to 1/100 second in the first hour, and accurate
to 1/60 second after 1 hour
7. Historical pedometer data storage and query function: it can store the pedometer
data of the previous 31 days and query the historical pedometer data of each day:
the number of walking steps, calories consumed, exercise time, exercise mileage
and average speed
8. Countdown function: the maximum countdown time is 24 hours
9. Metronome function
10. Compass function
11. Step completion rate progress bar
12. Low battery reminder function
13. Button tone setting (on or off)
14. EL light-emitting function: press the S4 key once to delay for 3 seconds
15. There is full display test function
6. Alarm function: three groups of timing alarm time can be set, there is an hourly
time report, snooze function and can be turned on or off by a single group
EL Backlight
In any mode, press the S4 button to light up and delay for 3 seconds
Interface switching view
On the step counting interface
of the day, step counting
is turned on
Press S1
normal time interface
Pedometer icon on
02
02