Remark:
1. When the stopwatch stop, the similar dots will flash.
2. After the stopwatch stop, it will automatically return to the time mode if there is no
operation for 5 minutes.
3. When each set of SPL is taken, the lower row displays the corresponding SPL value
(up to 10 sets).
4. The maximum stopwatch timing time is 23 hours, 59 minutes,
and 59 seconds. The first hour is accurate to 1/100 second, and the pound is
accurate to 1 hour later. 1/60 second.
5. When the stopwatch reaches the maximum number, it will stop automatically.
6. If the stopwatch are not reset to zero, even if you switch to other modes, the
stopwatch will continue.
7. After the operation is completed, press the S3 key to enter the next mode.
16
16
To Next Page
Loading...
