Northstar Explorer 657 Installation and Operation Manual60
Setup option menus
Factory default settings are shown. The setup data
available will depend on the optional sensors and
instruments installed.
System (see 17-1) Chart (see 17-2) Sonar (see 17-3)
Favorites (see 17-14)Time (see 17-13)
Alarms (see 17-9) Units (see 17-10) Comms (see 17-11)Logs (see 17-8)
Track (see 17-6)Fuel (see 17-5)GPS (see 17-4)
Calibrate (see 17-12) Simulate (see 17-15)
General, Water, Land and
Other submenus (17-2)
SmartCraft™
(See the SmartCraft™
Gateway Installation
and Operation Manual)
AIS (see 17-7)
To Next Page
Loading...
