Notifier NFS2-640/E - C.4.5: Clear Verification Counter; C.4.6: Clear the Entire History Buffer; C.4.7: Set the Pre-Alarm for Alert or Action

NFS2-640/E Operations Manual — P/N 52743:F1 06/16/2011 67
Using the CRT-2 for Alter Status Remote Terminal Access
C.4.5 Clear Verification Counter
Clear verification lets you clear the verification counter for all the addressable detectors in the
system.
C.4.6 Clear the Entire History Buffer
Clear History lets you clear the entire History buffer.
C.4.7 Set the Pre-Alarm for Alert or Action
Set Action/Alert lets you set the Pre-alarm for Alert or Action. For example, change Pre-alarm
from “Alert” to “Action” as follows:
STATUS CHANGE Clear verify count 08:29A Tue 04/15/08
Press <3><
ENTER>
***************History Clear*************************
Press <4><
ENTER>
Set Pre-alarm Alert (NO)/Action(YES). Type N or Y then Enter
STATUS CHANGE Change Alert/Action 08:29A Tue 04/15/08
Press <5><
ENTER>
Pre-alarm now set for ACTION
Press <Y><
ENTER>