NOVA BIOMEDICAL STATSTRIP - User Manual

Quick Reference Guide
Lactate Hospital Meter
Refer to the StatStrip
Lactate Hospital
Meter Instructions
for Use Manual and Package
Inserts for complete instructions
for use, indications, precautions,
and limitations of the system.
L A C
Lac
For Export Only

NOVA BIOMEDICAL STATSTRIP Specifications

General

Measurement Type	Electrochemical
Sample Type	Whole Blood
Measured Parameters	Glucose
Measurement Range	20-600 mg/dL
Calibration	Automatic
Operating Temperature	10-40°C
Power Source	Rechargeable battery
Intended Use	Point-of-care
Connectivity	USB
Operating Humidity	10% to 90% non-condensing
Battery Life	Approximately 1000 tests
Display	LCD

Summary

Intended Use

StatStrip Lactate Hospital Meter Overview

Barcode Scanning Functionality

Quality Control Testing Procedure

Adding Comments to Results

Running a Patient Sample Test

Docking and Charging Station Usage

Battery Replacement Guide

Meter Cleaning and Maintenance

Troubleshooting Common Errors

Battery Low Alert

Alert for low battery; indicates need to change or charge the meter.

Test Strip Removal Error

Indicates test cancellation due to strip removal; requires retest with a new strip.

Temperature Operating Error

Meter operating outside specified temperature range; requires environmental adjustment.

Bad Sample Error

Error due to sample quality; suggests re-testing with new strip or alternate method.

Replace Strip Error

Error during analysis; indicates need for new test strip or alternate method.

Flow Error Diagnosis

Specimen drawn incorrectly into strip; repeat test or use alternate method.

Transfer Connection Failure

Issue with network connection or server communication; check settings or contact administrator.

Transfer Interruption Error

Meter removed before data transfer complete; re-dock meter or continue without transfer.