Do you have a question about the NOVA BIOMEDICAL Nova StatSensor Xpress-i and is the answer not in the manual?
Brand | NOVA BIOMEDICAL |
---|---|
Model | Nova StatSensor Xpress-i |
Category | Measuring Instruments |
Language | English |
Lists essential safety precautions personnel must follow when operating the meter.
Covers battery power source, handling of solutions, and appropriate operating environment.
Warns healthcare professionals about potential transmission of viral diseases from blood contact.
Step-by-step guide for installing or replacing the meter's coin cell battery.
Guide on how to set the hour and minute format (12/24 Hr) and set the hour digits.
Instructions for setting the minute digits for the meter's clock.
Instructions to accept the selected minute choice and finalize time settings.
Explains how to choose between DD.MM and MM-DD formats for displaying the date.
Guide on how to select the current year for the meter's date setting.
Note on performing QC before patient samples and inserting the test strip.
Steps for washing, drying, and massaging the finger to obtain a blood sample.
Instructions for squeezing the finger to form a blood drop and applying it to the test strip.
Displays sample results in mg/dL and µmol/L and explains beep signals.
Describes how to interpret and act on 'HI' or 'LO' results and automatic saving.
Introduces troubleshooting for battery status, error codes, and actions.
Describes the 'very low' battery state, meter inoperability, and potential software reboot.
Introduces the error codes and the process of displaying them on the meter.
Details the E0 software error, its cause, and troubleshooting steps.
Explains the E1 system hardware error and recommended actions.
Describes the E2 temperature error and how to resolve it.
Explains the E3 used strip error and troubleshooting steps.
Details the E4 short sample error and recommended actions.
Explains the E5 strip not recognized error and how to resolve it.
Describes the E9 bad sample error and troubleshooting steps.