63
A.7 Cleaning and Care
The meters should never be immersed in any cleaning
agent. Always apply the cleaning agent to a soft cloth to
wipe the meter surface. Once complete, immediately dry
thoroughly. When cleaning the meter, please follow the
guidelines listed below:
• Dilute Bleach. A 10% solution of household bleach
(Sodium Hypochlorite) may be used.
• 70% Isopropyl (rubbing) Alcohol may be used.
• Commercial surface decontamination preparations
that are approved for use by your facility can be
used. Apply to a small test area rst to ensure
surface nish integrity.
• Avoid harsh solvents such as benzene and strong
acids.
To Next Page
Loading...
Need help?
General
