15
Operation Overview
• To perform a test, the operator inserts a test strip
into the test strip port. Touch the end of the strip to a
drop of blood, QC solution, or linearity solution. The
results are obtained in 30 seconds.
• Prior to analysis, the operator may designate the test
sample as a quality control sample (level C1, C2, or C3).
• Test results are automatically stored into non-volatile
memory.
• The operator can recall and review all stored test
results.
• There are automatic electronic function checks to verify
proper meter operation.
• The meter stores up to 400 patient, quality control,
linearity, and prociency test data.
Introduction
To Next Page
Loading...
