NOVA BIOMEDICAL STATSTRIP User Manual

QR-3
Barcode Scanning
A built-in barcode scanner provides automated data entry.
Patient ID's and lot numbers may be scanned into the
meter.
To scan a barcode, hold the barcode label parallel to and
approximately 2 to 6 inches from the scanner. Press either
the left or right side scan button. If the information appears
on the screen at the top (Screen Title), the barcode has
been successfully scanned. Press the OK button.
WARNING: Do Not stare into the laser light or point the
light towards anyone's eyes while scanning
a barcode.

NOVA BIOMEDICAL STATSTRIP Specifications

General

Measurement Type	Electrochemical
Sample Type	Whole Blood
Measured Parameters	Glucose
Measurement Range	20-600 mg/dL
Calibration	Automatic
Operating Temperature	10-40°C
Power Source	Rechargeable battery
Intended Use	Point-of-care
Connectivity	USB
Operating Humidity	10% to 90% non-condensing
Battery Life	Approximately 1000 tests
Display	LCD