NOVA BIOMEDICAL STATSTRIP User Manual

QR-4
Quality Control Test
The following section explains how to run a Quality Control
Test with one of the 2 Nova StatStrip Lactate Control
Solutions.
Read the StatStrip Lactate Control Solution package
insert sheet for complete instructions, indications,
precautions, and limitations of the system.
1. From the Patient Test screen, press the QC soft key.
2. The Enter Strip Lot screen displays. Enter the Strip Lot
Number or scan the barcode. To scan the barcode, press
the Scan soft key.

NOVA BIOMEDICAL STATSTRIP Specifications

General

Measurement Type	Electrochemical
Sample Type	Whole Blood
Measured Parameters	Glucose
Measurement Range	20-600 mg/dL
Calibration	Automatic
Operating Temperature	10-40°C
Power Source	Rechargeable battery
Intended Use	Point-of-care
Connectivity	USB
Operating Humidity	10% to 90% non-condensing
Battery Life	Approximately 1000 tests
Display	LCD