6.5 Times
Menu-> Settings->Times
You can setup the system time.
Note: The time you set will be shown on the front panel when you set receiver
to standby mode.
6.5.1 Event Timer.
Press the RED button to setup a timer, press the YELLOW button will delete
this timer and press the GREEN button can go to edit this timer.
6.5.2 Sleep Timer
1. Press the / button to select the option or input the number at “-- M”
option.
2. Press the OK button to save.
6.5.3 Standby Time
Standby Time can set the time display on front panel when standby.
6.6 Color Settings
Menu-> Settings-> Color Settings
Color Settings can set the Brightness ,Contrast ,Saturation ,Hue and
Sharpness.
6.7 IP Setting
Menu-> Settings-> IP Settings
If the Ethernet cable is connected fine, it will display “Connected”.
RED: Get IP address automatically.
GREEN: Test the network if connect correctly.
To Next Page
Loading...
Need help?
General
