Upload Data ,channel or all to USB
1) Enter the USB disk.
2) Press the YELLOW button and highlight the Upload Data ,channel or all
channel to USB.
3) Press the OK button can upload the data and setting to usb disk.
Upload to FTP
1) Highlight the file or folder.
2) Press the YELLOW button and highlight the Upload to FTP.
3) Press the OK button can upload the highlight file or folder to FTP.
8.2 Setting
1. Play Mode
Loop Set the Loop state on Normal, Reverse, Random, Single or Off.
Slide Show Interval Set the Slide Show Interval from 2S-10S.
Photo View Mode Set the Photo View Mode state on Full Screen, 2x2
Thumbnail or 2x3 Thumbnail.
2.PVR Setting
Record Partition Select the Partition where save your record or other
result of your operation.
Record Mode Set the Record Mode Channel or Transponder.
Record Type Set the Record Type TS or PS.
Record Time (Minute) Set the Record Default Time off, 30, 60, 90, 120
minute or input number directly.
Auto Timeshift Set start the Timeshift if automaticly.
Timeshift Buffer Size(MB) Set the Timeshift Buffer Size Auto , off, 100,
200, 400, 800, 1600, 3200, 6400MB.
Timeshift Need Save Set the Timeshift if need to Save.
Play Start Pos When playing the PVR file, set the Play Start Pos
whether head of the file or last pos (Stop play by manual last time) of
the file.
To Next Page
Loading...
Need help?
General
