ML0021 August 15, 2018
132 Copyright 2018 Bitronics, LLC
Figure 20 - Terminal Assignment
10.2 Features
Each input has jumper selectable ranges for support of 0 to (+/-)10 volt, 0 to (+/-)1mA,
and 4-20mA transducer input formats.
All input terminals protected with internal transient limiting devices and spark gap
protection.
Module meets CompactPCI Hardware Hot Swap specification.
Design includes local microcontroller with 24-bit sigma delta analog-to-digital converter.
Robust local microcontroller design incorporates local watchdog and continuously
monitors offset and gain calibration constants integrity via checksum calculation.
Removable terminal block for ease of installation
To Next Page
Loading...
